2x16 LCD Display
Power LED
2 Serial Activity LEDs
Timecode Output LED
Timecode Lock LED
Timecode Fault LED
Start Pushbutton
Pause Pushbutton
Stop Pushbutton
Rear Panel
Programming Port DB-9M
2 Serial Ports DB-9M
LTC Input 3-pin XLR Female
LTC Output 3-pin XLR Male
MIDI Input 5-pin DIN Female
MIDI Output 5-pin DIN Female
MIDI Thru 5-pin DIN Female
Discrete Input/Output DB-37F
Video Sync Input BNC
Power Barrel connector (2.5 mm x 5.5 mm x 10 mm)
Serial Ports
RS-232C
300 baud - 38.4 Kbaud
7, 8, or 9 Data Bits
1 or 2 Stop Bits
All parity types
One port may be used for MIDI
Opto Inputs
24 VDC, 20 mA maximum
Reconfigurable for voltages down to 5 VDC
or for pure contact-closure operation.
Trigger latency < 1 frame
Status Outputs
Drivers rated at 500 mA individually or 150 mA when used together
Trigger Memory
EEPROM stores 256 triggers
Nonvolatile, robust memory retains data permanently
No battery backup required
Physical
Size
19"W x 5 "D x 1.75"H (48.25 cm W x 12.7 cm D x 4.5 cm H)
If you have a Video Binloop in your system you already own a SMPTE Machine! By downloading scripts through the binloop you can use its controller card exactly as you would a SMPTE Machine.
