Alcorn McBride Knowledge Base

The DVM/HD has 2 HD15 connectors. One is the PC VGA output, and the other is the HD Video connector. Make sure that your video cable is connected to the 'HD Video Out' connector. If you are connected to the correct output and are still not seeing video (but hear audio), make sure that both the H and V sync signals are connected to the display device, and that the DVM/HD is configured for the correct output colorspace (RGB or YPbPr). If your device does not accept H and V sync signals, make sure that 'Sync on Green' is enabled. All of these settings can be manipulated using the Ethernet or Serial control interface of the DVM/HD. If these are unavailable to you, they can be modified using the DVMHD.INI file located on the DVM/HD hard disk. See the DVM/HD manual for more detailed information on changing settings.